Mrs Everybody has been making her own silver antibiotics. She thinks that it would be very useful for you to know how to do this too. While it might seem like quite a ‘big’ project, having silver water in your medicine chest and knowing how to use it, gives enormous peace of mind. Being able to make it yourself is truly liberating.
Mrs Everybody made her first batch with her little home-made kit in a middle of a bison farm. You can do yours in the comfort of your own home!
Applications of Silver Antibiotics
Colloidal silver can be used on all parts of the body – eyes, ears, introduced into the sinuses through the nose, gums, mouth and sub-lingually (under the tongue). Some people drink it. This is the beauty of colloidal silver – it gives you versatility which no antibiotic capsule could offer. I used mine last year when I had a middle ear infection, simply spraying it in the ear several times a day.
Not only is colloidal used to treat infections, it is also used prophylactically (to prevent infections). I met a customer who puts a drop in each cup of tea and he claimed he has not had a cold or infection for since he started using it seventeen years ago. Many people consider colloidal silver safer to use than conventional antibiotics.
Uses of Antibiotic Colloidal Silver
Silver nitrate or silver citrate were common as antibiotics before the advent of penicillin. These are ‘ionic silver solutions,’ and they are not as safe as the colloidal silver you will be making. Silver has come back into medical fashion and it is used in wound dressing for burns patients and in dressings on infected wounds, but not as colloidal silver. In fact colloidal silver doesn’t even appear on the new EU lists of approved food supplements. It seems the simplest and cheapest remedies (or food supplements) such as colloidal silver and green clay have not been included on the EU lists.
What is the basic process for making colloidal silver?
The silver water is made through electrolysis. You need a about 10-12 inches of 99.9% pure silver rods, a few electrical components, a glass jar, some batteries and distilled water. If it is already sounding complex, you can just buy a colloidal silver generator and just follow the instructions or buy ready to use silver water. I will give you links for this further down.
What is a colloidal solution?
Homemade colloidal silver yields both colloidal silver with some ionic silver. Colloidal silver is tiny particles of pure silver, suspended in water. While silver would normally sink, as it is heavier than water, when you make colloidal silver the positive electrical charge of tiny particle clusters of pure silver pushes them all equally apart and they remain suspended in water. Silver in this colloidal state can kill pathogens within minutes of contact.
Poorly made colloidal silver, excessive use and misuse, can result in a condition called agyria. The skin and eyes turn grey and the eyes can be damaged. Further consumption could lead to coma and death. Although some natural medicine literature claims that agyria is reversible, you can not benefit by making poor quality silver water, or by taking too much of it.
Make Your Own Colloidal Silver Generator
Here is your shopping list. I took mine to a huge Maplins and there I purchased everything except the silver rods and glass jar. So that was easy. I keep everything in the glass jar in which the silver water is made.
3 x 9V alkaline transistor radio batteries (the rectangular batteries)
3 x battery snap-on lead connectors
2 x insulated alligator clips
1 x 24V-40mA subminiature incandescent bulb
One foot of heat shrink insulation tubing (which didn’t seem to shrink very well for me)
One foot of 2-conductor stranded, insulated twisted-wire for clip leads
Ten inch piece of pure silver wire (.999 fine) You can buy lengths of silver wire here.
This gives you a 27 volt system.
You will also need a 1 litre glass jar and distilled water.
How to make Your Own Portable Colloidal Silver Generator
Solder your three snap-on battery clips in series (red to black) to provide 27 volts. Connect a 24V incandescent lamp in series with either positive or negative output lead. Solder the red insulated alligator clip to the positive (anode) and the black insulated clip to the negative (cathode) 2 conductor lead wires. Insulation is shrunk over soldered connections using a heat gun or hair dryer.
Cut your 10″ of silver wire in half. Bend top ends of your two 5″ silver electrode wires so they can clip over the top rim of a plastic or glass cup (not metal). About 4″ of each wire should be submerged. WARNING! Use ONLY pure silver (.999 fine) electrodes. 1.5 – 2.00mm is the preferred thickness.
Making the Colloidal Silver
Colloidal Silver Generators
Perhaps soldering little wire together seems a bit dauting. Don’t worry, you can by a British made Colloidal Silver Generator at Good Vitality products, here. The manufacturer is also very knowledgeable about using silver water, so you would be being the machine from an expert.
If again that doesn’t appeal, you can also buy ready made colloidal silver from the same source.
Many methods of making colloidal silver including using solar panels.
Video testing for parts per million (ppm), with Chris from www.goodvitality.com
Colloidal Silver Dosage
Orally Taking a quantity up to half a pint by drinking it. Usually on an empty stomach 2 hour after eating. AdvantagesEasy to take and can take larger quantities.Disadvantages It is thought that the acids in the stomach will oxidise the majority of the CS, which means it will lose its all important charge. After this the CS faces the bile and digestive enzymes in the duodenum which are strongly alkaline. This will render even more of the CS ineffective. Any remaining CS can now be absorbed by the small intestine.
Topically Applied directly to the skin or anywhere on the outside of the body. Using CS gel. This lasts much longer than simple CS solution. Advantages This is a very effective and quick way of dealing with skin infections. For example impetigo, athletes foot and even mouth ulcers. Disadvantages The CS only gets to the area where the gel is applied. It does not raise blood levels.
Sub lingually (under the tongue) Placing a tablespoon of CS under the tongue and leaving it to absorb. Advantages Will by-pass the stomach acid and the liver going straight in to the blood stream. Disadvantages Questionable amounts of it may be absorbed. How much of that table spoon of CS do you swallow and how much crosses the oral mucosa is debatable. Only small amounts can be administered at a time.
Rectally Using a syringe and tubing a quantity of CS can be administered directly in to the rectum; typically 20 to 30ml Advantages This is the most efficient way to get CS in to the blood. The CS is completely absorbed by the rectum, there is no stomach acid or bile to destroy its effectiveness. It is a very effective way to access the Liver and raise CS levels in the blood. Disadvantages Most people in the UK find this route of administration laughable and can’t understand why any one would want to do it. The reasons mentioned should make it clear that it is the best method. It is not at all difficult and if your life is on the line, you should consider this method, it is miles better than any other route.Nebulisation
Using a special machine called a nebuliser the CS is made in to a fine mist which is inhaled (1 to 5ml). Advantages This is a very effective way of delivering CS to the Respiratory system. It can be very beneficial for treating infections in the lungs and throat. Disadvantages Only a small amount of CS is nebulised at a time (up to 5ml) so very little is likely to reach the blood supply and therefore the rest of the body.
dosage table reproduced with permission from www.goodvitality.com
Happy and Healthy Days!